China glass supplier for glass inspection method
- Author:Clarence
- Release Date:2014-11-17
Glass ProductsThe inspection, mainly to see the appearance of quality lubricating, with or without bubbles, inclusions, scratches, lanes and fog spots and other quality shortcomings, the existence of such shortcomings glass, in the use of the onset of deformation will reduce the transparency of the glass, mechanical strength and thermal stability of the glass, the construction should not be selected. Because glass is brightly lit objects in the selection through visual, simply can identify good or bad quality.
Glass finished products of inspection, in addition to demand inspection of flat glass, we must also examine its processing quality inspection standard size is not standard, precision and clarity and so is not fit the pattern of demand, together with the damaged edges are not allowed.
Double glazingQuality does not allow the appearance of cracks in the glass body is not allowed to have blocked out the melt, welding and plastic does not allow two bad connection between the vitreous. Visually layered striped glass should not have ripples and bubbles in the glass body is not homogeneous occurred. Omo recessed inside the outer appearance of glasses should be less than 1 mm, convex should be less than 2 mm, the weight should be consistent with quality standards, without the appearance of warping and nicks, burrs and other quality shortcomings, viewpoints to be slick.
Glass finished products of inspection, in addition to demand inspection of flat glass, we must also examine its processing quality inspection standard size is not standard, precision and clarity and so is not fit the pattern of demand, together with the damaged edges are not allowed.
Double glazingQuality does not allow the appearance of cracks in the glass body is not allowed to have blocked out the melt, welding and plastic does not allow two bad connection between the vitreous. Visually layered striped glass should not have ripples and bubbles in the glass body is not homogeneous occurred. Omo recessed inside the outer appearance of glasses should be less than 1 mm, convex should be less than 2 mm, the weight should be consistent with quality standards, without the appearance of warping and nicks, burrs and other quality shortcomings, viewpoints to be slick.